The SYMBIOS TANK POD features a 7/16"-UNF port and can be connected to a high pressure port of a first stage scuba pressure regulator. A 19 mm wrench can be used.
Make sure, that the flow restrictor is inserted. In the case of a mechanical pressure sensor failure, the flow restrictor canlimits the maxiumum gas flow through the SYMBIOS TANK POD.
Use a first stage with two high pressure ports, so that next to the SYMBIOS TANK POD , also a backup SPG can be conencted.
Installation torque should be hand-tightened, excessive force is not needed.
To optimize the reliability of the data transmission, install the tank transmitter on the same side, where you also wear your dive computer.