Vibration alarm

<< Click to Display Table of Contents >>

Navigation:  Diving >

Vibration alarm

The SYMBIOS HANDSET features an integrated vibrator motor to alert the diver of potentially dangerous situations.

 

Those include:

Tank pressure below 50 bar
one vibration signal each 24 s                

Tank pressure below 25 bar
one vibration signal each 8 s

Ceiling violation
one vibration signal each s        

pO2 too high or too low:        
one vibration signal each s

 

Moreover vibration is also used to prompt the diver to do a:

gas switch
one vibration signal each 24 s

tank switch in sidemount diving, when the tank pressure difference between the two tanks is greater than 30 bar
one vibration signal each 24 s
 

Vibration alarms can be enabled/disabled in menu/SYSTEM/VIB ALARMS

 

notice_symbol

Press and hold both buttons to confirm an alarm and deactivate a pop up message and vibration alarm.

 

notice_symbol

If new potentially dangerous situations occur, vibration alarms will be triggered, even if previously a vibration alarm was confirmed.